2023 KOMATSU PC210 LC-11

    USD $158,400 
    Rental Prices:
    Call For Availability
    Machine Location:4 Technology BlvdCanastota, New York 13032

    Seller Information

    View Seller Information

    Clark Equipment

    Contact:Matt Gascon

    Phone:(315) 367-4788

    Canastota, New York 13032

    visit our website

    (315) 367-4788

    Hide Thumbnails

    Description

    It's all there! Hydraulic coupler, hydraulic thumb, auto-greaser unit Engine Model: Komatsu SAA6D107E-3 (water-cooled, 4-cycle, direct injection, turbocharged, aftercooled, with cooled EGR) Net Horsepower: 165 HP @ 2,000 rpm (ISO 9249/SAE J1349) Number of Cylinders: 6 Displacement: 408 cubic inches Hydraulics Type: HydrauMind (closed-center load-sensing system with pressure-compensated valves) Main Pumps: 2 variable displacement piston pumps Maximum Pump Flow: 125.5 gpm Relief Valve Settings: Implement Circuits: 5,400 psi Travel Circuits: 5,400 psi Swing Circuit: 4,190 psi Pilot Circuit: 470 psi Auxiliary hydraulics are supported (typically 1-2 additional proportional control circuits available as options for breakers, thumbs, etc.) Capacities Fuel Tank: 105.7 gallons Hydraulic System (total): 61.8 gallons Hydraulic Tank: 34.9 gallons Engine Oil: 6.1-6.2 gallons Cooling System (Radiator): Approximately 8.1 gallons DEF (AdBlue) Tank: 6.1 gallons Swing Drive: 1.7 gallons Final Drive (each side): Approximately 1.3 gallons Weight Operating Weight: 51,397 – 53,882 lbs (varies by shoe width, boom/arm config, bucket, full fluids, operator, and options like aux hydraulics/coupler; typical range with 31.5-inch shoes and standard setup is around 53,000-54,000 lbs) Ground Pressure: Approximately 5.9-6.7 psi (depending on shoe width, e.g., lower with wider shoes) Dimensions (approximate, standard config with one-piece boom and 9 ft 7 in arm; may vary slightly with attachments) Shipping/Transport Length: Approximately 32 ft (overall, boom down) Overall Width: 10 ft 5 in (with 31.5-inch shoes; narrower/wider with other shoe options) Height to Top of Cab: Approximately 10 ft Tail Swing Radius: 9 ft 11 in Ground Clearance: 1 ft 5 in Track Length on Ground: Approximately 12 ft Max Digging Depth: Approximately 21 ft 9 in (standard arm) Max Reach (along ground): Approximately 32 ft

    Specifications

    Year2023
    ManufacturerKOMATSU
    ModelPC210 LC-11
    Hours1,828
    Serial Number6610
    ConditionUsed
    Stock Number6610
    ThumbYes
    Thumb TypeHydraulic
    Year2023|
    ManufacturerKOMATSU|
    ModelPC210 LC-11|
    Hours1,828|
    Serial Number6610|
    ConditionUsed|
    Stock Number6610|
    ThumbYes|
    Thumb TypeHydraulic|
    Show As Paragraph

    Your current browser cannot run our content, please make sure your browser is fully updated or try one of the browsers below.

    Your browser is not supported

    Microsoft Edge

    Google Chrome

    Mozilla Firefox