Description
Masaba 48' Low Profile Drive Over Truck Unloader
Load Area
• Grate – Constructed of Heavy Duty flat bar, 10’ x 5’ outside dimension
• Two Ramp System - Located on each side of the Loading area.
o Includes (2) Self-Cleaning Ramp - Hinged on each side of grate, hydraulically folding for cleaning after each loading and travel
o Self-Deploying (2) Outer Ramps – 10’ wide by 9’ long Outer Ramps Self-Deploy with lever arm system without the need of additional equipment to lift or move it into position. Outer ramps can be
disconnected for cycled cleaning
• (2) Extended Outer 3rd Ramp – (2) 8’ extended ramp each side to grade, pins to
existing outer ramp for operation and travel, manual folding, via hinge
Chassis
• Frame – constructed of Heavy Duty steel tubing
• Tandem Axle - Tandem walking beam with (8) 11 x 22.5R tires
• Hydraulic Landing Jacks and Power Unit – 13hp Honda unit. Honda can also raise/lower conveyor
• Road Portable Package – Including 5th wheel hitch, brakes, lights and mud flaps
48” Discharge Conveyor
• Undercarriage - Hydraulic raise and lower, 11ft maximum discharge height
• Frame - Channel frame
• Drive - Dual head drive
• (2) Gear Reducers – Dual Class II reducers with QD bushings
• (2) Motors – (2) 25 HP 1800 RPM
• (2) V- Belt Drives - with drive guards
• Capacity – 1,000 STPH based on 100# per cu/ft of material, 1.5” minus
• Belt Speed - 225 FPM
• Flow Control – with adjustable slide gate
• Discharge Hood – with AR liner To feed 36” belt width or greater
• Loading Area Idlers – CEMA C, 5” diameter flat carrier idlers
• Transition Idlers - CEMA C, 20 degree, sealed, 5” diameter trough idlers
• Troughing Idlers - CEMA C, 35 degree, sealed, 5” diameter trough idlers, 3' spacing
• Return Idlers - CEMA C, sealed, 4” diameter return idlers, 10' spacing
• Drive Pulley - Heavy Duty, 20” diameter, drum pulley with Slide Lagging
• Tail Pulley - Heavy Duty, 14” diameter, self-cleaning wing pulley
• Snub Pulley – Heavy Duty, 14” diameter, drum pulley with 3/8” smooth rubber lagging
• Shafts - C1045 turned and polished
• Bearings - Pillow block bearings
• Take Ups - Screw type
• Belting - 3-ply 3/16 x 1/16 330 PIW
• Belt Splice – Vulcanized splice
• Belt Scraper – Flexco Primary
General Specifications
• Hydraulic Unit – 20hp electric pumping unit with manual controls for ramps and conveyor discharge raise and lower.
• Electrical - 480 v/3 ph/60 hz enclosed panel. Includes main disconnect, circuit breaker and push button on/off switches with soft start. Mounted to chassis. With 100ft lead cord
• Wireless Remote Control
• Guards – Tail pulley guard, v-belt guard and nip guard on head pulley. We do not warrant that our guards will meet all local codes.
• Intraflo Central Lube SystemSpecifications
Year2024
ManufacturerMASABA
Model48 IN
Serial Number2024194
ConditionUsed
Year2024|
ManufacturerMASABA|
Model48 IN|
Serial Number2024194|
ConditionUsed|
