2015 JLG G10-55A

2015

7569

Used

4,661

7569

Outriggers down; heavy materials up!! Lift Performance: Rated capacity (at 24 in. load center): 10,000 lbs. Max lift height: 55 ft. (one source lists 54 ft. 9 in.) Max forward reach: 42 ft. (one source lists 42 ft. 6 in.) Load at max height: 5,000 lbs. Load at max reach: 3,000 lbs. Drawbar pull (loaded): 20,000 lbs. on the brochure; 24,000 lbs. on a later sheet Frame leveling: 10° Cycle Times: Lift: 14.6 sec. up / 15.8 sec. down Telescope: 17.3 sec. out / 16.8 sec. in Dimensions: Overall length (less forks): 20 ft. Overall width: 8 ft. 4 in. Overall height (stowed): 8 ft. 4 in. Wheelbase: 12 ft. Ground clearance: 18 in. Outside turning radius: 14 ft. Weight: Operating weight: 34,400 lbs. with a 48 in. carriage and forks (the JLG spec sheet shows 34,850 lbs.) Engine: Make/model: Cummins QSB4.5, turbocharged and aftercooled Cylinders: 4 Displacement: 276 cu. in. Gross power: 130 hp @ 2,400 rpm Max torque: 457 lb-ft. @ 1,500 rpm Fuel tank: 38 gal. Drivetrain: Transmission: powershift with torque converter, 4-speed forward and 3-speed reverse Top travel speed: 20 mph Axles: trunnion-mounted planetary steer axles, with a high-bias limited-slip differential on the front Steering: 2-wheel, 4-wheel, and crab modes Brakes Service: inboard wet disc on the front and rear axles Parking: wet disc, spring-applied, hydraulic release on the front axle Tires: Standard: 400/75-28 Optional: foam-filled or solid Electrical: 12V system, 65 amp alternator Other: Hydraulic system capacity (with tank): about 57 gal. Single joystick control Certified ROPS/FOPS structure Outriggers (axle-mounted) required for maximum capacity at full height and reach

10,000 lb

55 ft

Enclosed

4WD

125 HP