Description
Metso/Nordberg C3054 (30” x 54”) Jaw Plant
Crusher:
• Nordberg Model 3054 (30” x 54’) single toggle Jaw Crusher of non-welded
• V-belts and motor sheave, drive guard,
• 200 HP, 1200 RPM Motor
• Hyd Adjust
Feeder:
• 54” x 20’ Grizzly Feeder
• 40HP Motor
• Feeder motor variable frequency speed drive
• 3” nominal spacing, adjustable grizzly bars
• V-belts, motor sheave, pivot motor base
• Hopper constructed of 3/4” AR steel
• Protective rubber curtain guards on both sides of feeder in loading areas
Extended Rear Discharge Conveyor:
• 60” Under crusher conveyor Extended (discharges over axles)
• 20HP Motor
• 3-ply belt with vulcanized splice
• V-belt drive.
• CEMA "C" 5" diameter troughing idlers. Rubber disc return idlers.
• Impact bed – Superior MD Impact bed under crusher receiving hopper
• Belt Scraper
Chassis:
• Four axle (Split Tandem) chassis constructed of heavy duty wide flange beam
• Air Ride Suspension
• Heavy duty 25,000lb suspension w/ (16) 11R x 22.5 radial tires
• Brake Package – air brakes, emergency valve and plumbing
• Light Package – brake and directional signals
• Grizzly by pass chute from 1/4" A36 plate and 1/4" AR steel liners
• 24” reversible cross conveyor w/ Dodge gearbox, 7.5 hp, CEMA C idlers, and 2-ply belt with vulcanized splice for Grizzly By Pass
• Crusher discharge chute out of mild steel with AR liners
• Crusher feed box out of ¾” Mild Steel with 1/2” AR400 liners
• Lower operators platform and upper operators platform
• Upper and lower access platforms with diamond plated catwalk, access ladder and railing
• Bulkhead on one side of the plant
• Qty (6) “Run On” hydraulic jacks
• Qty (2) Swing down front legs with screw jacks
• Chord holder
• Aluminum tool box
• Guarding – Appropriate guarding supplied. We do not warrant that our guards will meet all local codes. It is the responsibility of the end user to have them checked by a local inspector.
Electrical:
NEMA Switch Gear - Soft-start with a shorting contactor, branch breaker and lockout for a 200hp motor. Variable Speed drive, branch breaker and lockout for the feeder motor. Main breaker with a handle through the door. Control transformer with fusing. Reversing starter for 24” cross conveyor. (2) extra #2 starters for off plant conveyors. 100’ of lead cord to go to the power sourceSpecifications
Year2023
ManufacturerMETSO
Hours1,189
ModelC3054
Serial Number15993
ConditionNew
Year2023|
ManufacturerMETSO|
Hours1,189|
ModelC3054|
Serial Number15993|
ConditionNew|
