Description
Masaba 36” X 125’ PORTABLE RADIAL STACKER
• Main Frame – 36” Deep truss (head & tail), 41” deep truss (middle)
• Chord Angles – 4” x 4” x 1/4” (with 4” x 4” x 5/16” tail section)
• Lattice Angles - 2” x 2” x 1/4”
• Cross Angles – 2” x 2” x 1/4”
• Full Length Under Support Angles – 3” x 5” x 5/16”
• Power Top Folds – Hydraulically folding head and tail sections
• Tubular Undercarriage – Hydraulic raise with pin lock height adjustment
• Hydraulic Raise – with 5hp motor, pump, cylinder, reservoir, valve body and plumbing
• Travel Axle - tandem walking beam axle with (8) 11R x 22.5 tires
• Hydraulic Fold Down Radial Axle - with (4) 385/65R22.5 tires
• Power Travel – 2 wheel drive, planetary wheel drive, with brake
• Brakes, Lights & Mud Flaps
• Swing Down Crank Jack Landing Legs – with winch and cable
• Drive – Class II Wrap Drive
• Gear Reducer – Dodge TXT#8 with sheave, QD bushing and backstop
• Motor – 50hp electric with sheave and QD bushing
• V-Belt Drive – with drive guard
• Capacity – 850 TPH based on 100# per cu/ft of material
• Belt Speed – 410 FPM @ 18 degrees
• Drive Pulley – Heavy Duty, 24” diameter drum pulley with 3/8” Herringbone lagging
• Drive Pulley Shaft & Bearings – 3 15/16” shaft with Dodge Type E bearings
• Tail Pulley – Heavy Duty, 16” diameter self-cleaning wing type pulley
• Tail Shaft & Bearings – 3 7/16” shaft with Dodge Type S2000 bearings
• Snub Pulley – Heavy Duty, 16” diameter self-cleaning wing type pulley
• Snub Shaft & Bearings – 3 7/16” shaft with Dodge Type E bearings
• Head Pulley – Heavy Duty, 18” diameter drum pulley (No Lagging)
• Head Shaft & Bearings – 3 15/16” shaft with Dodge Type E bearings
• Take Ups – screw type
• Belting – 3-ply 3/16” x 1/16” conveyor belt
• Belt Splice – Vulcanized Splice
• Belt Wiper – Martin Pit Viper with Twist Tensioner
• Transition Idlers – CEMA C, Precision, 20 degree sealed 5” diameter trough idlers
• Troughing Idlers – CEMA C, Precision, 35 degree sealed 5” diameter trough idlers, 4’ spacing
• Return Idlers – CEMA C, Precision, sealed 5” return idlers, 10’ spacing
• Hopper – 6’ long hopper with adjustable rubber flashing
• Radial Receiving Hopper
• Brakes, Lights, & Mud Flaps
• Towing/Lift Eye
• Base Plate with 5th Wheel Pin
• Anchor Pivot Plate
• Switchgear – NEMA 4 enclosure with 200ft lead chord includedSpecifications
Year2023
ManufacturerMASABA
Hours1,518
Model36X125
Serial Number2023434
ConditionUsed
Year2023|
ManufacturerMASABA|
Hours1,518|
Model36X125|
Serial Number2023434|
ConditionUsed|
