2026 KM INTERNATIONAL KM T2
Description
The KM T-2 is an asphalt recycling machine capable of producing 4 tons of hotmix asphalt in an hour. The KM T-2 asphalt recycler trailer will recycle asphalt millings, chunks, and other RAP material into plant-grade asphalt. The KM T-2 allows contractors the ability to perform year-round repairs with quality hotmix asphalt material. *USED UNITS MAY BE AVAILABLE AS WELL*
Cost Savings: Asphalt for $15-25 a ton compared to $60-75 at the plant or $110 + for cold patch
Efficiency: Produces a load of 2,600Lbs. every 15-20 minutes or Approx. 4 tons/hr.
Reliability: Recycle millings into plant quality or better mix year round. NO DIRECT FLAME IMPINGEMENT ON MATERIAL
Green Process: No longer do you have to throw out old chunks or millings
Versatility: Ability to add as much or as little asphalt cement as you want to completely customize you mix design
Profitability: If you are an asphalt producer you now have the ability to keep key customers supplied with HMA year round
Time Saving: Skip the long lines and hassle at the asphalt plant by using the T-2 to produce HMA at your shop or on the job site
Trailer Specs
Dimensions (l x W x H) - 23’1” x 8.3’ x 9'
Weight - 8,600 Lbs.
Top Opening (L x W)- 26” x 94”
Axels - Dual 7,000 lbs. axels, w/ electric brakes on all wheels
Construction - 8” Channel steel with 2 ½” x ¼” square tubing support members
Actuators - (2) 2” x 16” hydraulic cylinders
Asphalt Heating Drum
Construction - 3/16” steel: 450 Brinell hardened
Agitation Paddles - (7) 3/16”: 450 Brinell Hardened
Rotation - Hydraulically controlled, approx. 9 RPM
Hydraulics
Reservoir - 30 Gallon
Pump - 9.5 gal./minute
Motor - 38 cubic inch
Heating System
Fuel - No. 1 or 2 Diesel, B-5 bio-diesel, or kerosene
Fuel Storage -80-gallon fuel tank with filter and manual shut off
Burner type - Beckett Model SDC
BTU Output - 700,000
Engine - 21 BHP Kubota
Loading/Unloading
Loading - Milled asphalt or broken chunk pieces up to 12”
Unloading - Unload directly into application area or into front end loader bucketSpecifications
Year2026
ManufacturerKM INTERNATIONAL
ModelKM T2
Hours0
ConditionNew
Year2026|
ManufacturerKM INTERNATIONAL|
ModelKM T2|
Hours0|
ConditionNew|
