Description
New Fabtec Portable 30 x 55 Jaw Plant, Reverse Pull
3 AXLE CARRIER 24" 76# WF BEAMS:
• Ride Rite Air Suspension
• 22,500# Standard forge axles 10' tread.
• 11:00R x 24.5 tires.
• Single Axle Booster
• FAB TEC 70K RUN-ON SYSTEM
a. 18” Stroke cylinders 70,000 lb. capacity (at 2500 psi) with Safety-Lok circuit.
b. Delta HPX-200 12-volt power unit.
c. (1) Spool valve~ number of banks to match leg quantity.
d. Cylinder mounting plates & hardware.
e. Heavy duty footpads
• Front heavy duty forward folding legs.
• Air brakes, LED brake lights, LED marker lights, LED strobe light, reflective tape, and mud flaps.
• 200hp 1200 RPM TEFC Toshiba Crusher Drive Motor"
Puzzolana 30x55 (140cmx76cm) Jaw Crusher with motor mount
• Fully bolted and dowelled four-piece heavy-duty structure
• Front and rear frames are cast steel
• Side plates produced from structural steel plate
• Infinitely variable closed side setting adjustment through hydraulic actuated wedges. Externally mounted hydraulic cylinders for maintenance accessibility
• Fixed and moving jaws are each retained with a single wedge. Fix die is held by a wedge not cheek plates.
• Bolt-on replaceable lower jaw die seat for both the fix and moving die
• Corrugated manganese dies are reversible top and bottom
• Hydraulically tensioned tension rod with hydraulic power unit.
• V-drive system."
New Simplicity 51"" x 20' Vibrating Grizzly Feeder S/N 5120-GF120A-6728…
• Side frame is 26” fabricated side channel
• Feeder back and pan weldment is constructed of ½” mild steel plate
• Side liners are ½” AR steel and pan is ½” AR steel
• Pan deck has 8” fabricated channel cross members with heavy-duty construction and filler bars forming an egg-crate design for superior rigidity
• 120mm bearing assembly
• 4” nominal grizzly bar spacing
• V-belt drive with pivoted motor base
9’ x 21’ ~ 3/4” Plate Jaw VGF Feed Hopper…
• 14"" WF support beams under hopper with diagonal braces.
• 3/4” plate hopper with ½” AR liners on the bottom verticals of hopper
• Removable 2-ply Rubber curtains with channel and flat bar frame on both sides of VGF
3/8"" Plate by-pass chute under grizzly area to under jaw conveyor, with rock clearance provision for reject conveyor
Full observation platform over jaw with diamond plate floor and folding hand rails with access ladders, maintenance platform on lower deck.
Self-closing safety gates at ladder openings
54" x 46' Under Jaw Conveyor…
• 30hp @ 1800 RPM TEFC Toshiba Motor
• 16” Lagged crown head pulley, 14” self-cleaning wing tail pulley.
• Impact slider bed under jaw area, then 36"" spacing on Cema C.
• Vulcanized 3 ply belt.
• Rubber disc return rolls
• Dodge SCM bearings and 2 15/16"" alloy shafts.
• FabTec heavy duty take-ups.
• Inspection/clean-out door in back of hopper.
• Superior X-terra belt scraper.
• Hydraulic raise and lower of under jaw conveyor
AR lined jaw discharge hopper with adjustable wipers
Tool box mounted on chassis.
EXCLUDES: Freight, switch gear or wiring, setup or installation, taxes, fees or permits.Specifications
Year2026
ManufacturerFAB TEC INC
Hours0
Model30X55
ConditionUsed
Stock Number250702 JC16
Year2026|
ManufacturerFAB TEC INC|
Hours0|
Model30X55|
ConditionUsed|
Stock Number250702 JC16|
