Description
MASABA 48” LOW PROFILE TRUCK UNLOADER – LPTU48
LOAD AREA
• Self-Relieving Load Area
• Grate - Constructed of Heavy Duty flat bar, 10’ x 5’ outside dimension
• Ramp System - Located on each side of the Loading area.
o Includes (2) Self-Cleaning Ramps - Hinged on each side of grate, hydraulically folding for cleaning after each loading and travel Hyd Fold
o Includes (2) Center ramps Hyd Fold
o Includes (2) Outer Ramps Hyd Fold
• Masaba Patented Self-Deploying Center and Outer Ramps –
Ramps Self-Deploy with hydraulic system without the need of additional equipment
to lift or move it into position. Inner ramps can be disconnected for cycled cleaning.
Extended Outer 3rd Ramp – (2) 8’ extended ramps each side to grade, pins to center ramp
for operation and travel, Hydraulic folding flip out via hinge
CHASSIS
• Frame - Constructed of Heavy Duty steel tubing
• Tandem Axle - Tandem walking beam with (8) 11x22.5R tires
• Landing Jacks - hydraulic landing legs
• Road Portable Package - Including 5th wheel hitch, brakes, lights and mud flaps
48” DISCHARGE CONVEYOR (approx. 48” x 46’)
• Undercarriage - Hydraulic raise and lower, 11’ maximum discharge height
• Frame - Channel frame
• Drive – Dual Class II head drive with V-Belts and Guard
• Gear Reducers – (2) Dodge shaft mount reducers with sheaves, bushings, and backstops
• Motors - (2) WEG 25hp 1800rpm
• Capacity - 1,000 STPH of 100 PCF material, 1.5” minus spherical lumps
• Belt Speed - 225 FPM
• Flow Control – manual adjustable slide gate
• Steel Hold Down Wheels
• Loading Area Idlers – PPI, CEMA C, 5” diameter flat carrier idlers
• Transition Idlers – PPI, CEMA C, 20 degree, sealed, 5” diameter trough idlers
• Troughing Idlers – PPI, CEMA C, 35 degree, sealed, 5” diameter trough idlers
• Return Idlers – PPI, CEMA C, sealed, 5” diameter rubber disc return idlers
• Drive Pulley – PPI Heavy Duty, 20” diameter, drum pulley with 1/2" herringbone lagging
• Tail Pulley – PPI Heavy Duty, 14” diameter, self-cleaning wing pulley
• Snub Pulley – PPI Heavy Duty, 14” diameter, drum pulley with 3/8” smooth rubber lagging
• Shafts - C1045 turned and polished
• Bearings – Dodge Pillow block bearings
• Take Ups - Screw type
• Belting - 3-ply 3/16 x 1/16 330 PIW
• Belt Splice – Vulcanized Splice
• Belt Scraper – Flexco EZP1
• Discharge Hood - with 5/16” AR countersunk bolt in liners, to feed 36” belt width or greater
GENERAL SPECIFICATIONS
• Hydraulic Unit - 20hp electric pumping unit to electrically control ramps and conveyor discharge raise and lower, including continuous cycling and hot climate protection, 24V solenoids
• 13hp Electric start Gas Powered Unit – to manually operate hydraulic landing legs, conveyor raise/lower, and hinged ramp raise/lower, independently, to remove from truck and setup.
• Electrical – 480V/3ph/60Hz enclosed panel. Includes main disconnect, circuit breaker and push button on/off switches with soft start. Mounted to chassis. With 100’ lead cord
• Wireless Remote Control System
• Walkway Over Belt
• Intraflo Central Lube SystemSpecifications
Year2026
ManufacturerMASABA
ModelTU48
Serial Number2026385
ConditionUsed
Year2026|
ManufacturerMASABA|
ModelTU48|
Serial Number2026385|
ConditionUsed|
