2016 CATERPILLAR 249D

2016

409

CAT0249DVGWR01128

Used

Machine Highlights Year: 2016 Make: CAT Model: 249D OROPS Auxiliary Hydraulic Operating weight: 7,831lbs Tipping Load: 4,970lbs Hours: 409 Serial Number: CAT0249DVGWR01128 Warranty EXTENDED WARRANTY AVAILABLE FOR PURCHASE Ask one of our salesmen for more information! Engine Gross Power - SAE J1995:2014:67.1 hp Displacement: 134.3 in³ Bore: 3.3 in Stroke: 3.9 in Peak Torque - 1,500 rpm - SAE J1995: 153 ft·lbf Engine Model: Cat C2.2 CRDI Operating Specifications Rated Operating Capacities - 35% Tipping Load: 1740 lb Tipping Load: 4970 lb Ground Contact Area - With 320 mm/12.6 in Track: 1373 in² Ground Pressure - With 320 mm/12.6 in Track: 5.7 psi Breakout Force - Tilt Cylinder: 3907 lb Ground Contact Area - With 400 mm/15.7 in Track: 1716 in² Ground Pressure - With 400 mm/15.7 in Track: 4.7 psi Rated Operating Capacities - 50% Tipping Load: 2485 lb Operating Weight: 7831 lbs Powertrain Travel Speed - Forward or Reverse - One Speed 5 mile/h Travel Speed - Forward or Reverse - Two Speed 7.6 mile/h Service Refill Capacities Engine Crankcase: 2.6 gal (US) Fuel Tank: 15.1 gal (US) Hydraulic System: 11.9 gal (US) Cooling System:3.2 gal (US) Hydraulic Tank: 9 gal (US) Dimensions Length - Track on Ground 54.5 in Overall Length - Track 71.2 in Height - Top of Cab 80.3 in Ground Clearance 7.6 in Departure Angle 34.5° Maximum Dump Angle 48° Vehicle Width (400 mm/15.7 in tracks) 69.1 in Length - With Bucket on Ground 127.3 in Maximum Overall Height 150.8 in Bucket Pin Height - Carry Position 8.6 in Maximum Reach - With Arms Parallel to Ground 51.8 in Length - Without Bucket 99.3 in Turning Radius from Center - Machine Rear 57.4 in Bucket Pin Height - Maximum Lift 118.2 in Clearance at Maximum Lift and Dump 88.7 in Vehicle Width (320 mm/12.6 in tracks) 66 in Turning Radius from Center - Coupler 45.7 in Reach - Maximum Lift/Dump 28.6 in Rack Back Angle - Maximum Height 87.5° Turning Radius from Center - Bucket 81.1 in 2016 CATERPILLAR 249D AUXILIARY HYDRAULIC OROPS TRACK SKID STEER LOADER WITH AN OPERATING WEIGHT OF 7,831LBS! EXTENDED WARRANTY AVAILABLE FOR PURCHASE. ASK ONE OF OUR SALESMEN FOR MORE INFORMATION! SE HABLA ESPAÑOL! FINANCING AVAILABLE! PLEASE CALL US WITH ANY QUESTIONS! ASK ABOUT OUR REASONABLE SHIPPING RATES!

15.1 gal

1,740 lb

7,831 lb

Yes

4,970 lb

5.7 psi

3,907 lb

Open

5 mph

7.6 mph

7.6 in

99.3 in

127.3 in

80.3 in

69.1 in

67.1 HP

127.3 in

69.1 in

80.3 in

7,831 lb