A Closer Look At The Broderson IC200-3H Carry Deck Crane

    Posted On: July 25, 2019

    This is a 2015 version of the popular Broderson IC200-3H carry deck crane.

    The Broderson IC200-3H is a popular carry deck crane with a 15-ton (13.6-metric-ton) maximum lift capacity at a 6-foot (1.8-meter) load radius. Despite its compact dimensions—just under 8 feet (2.4 meters) tall and wide in transport trim—it can attain a maximum tip height of 73 feet (22.3 meters) with an optional boom extension.

    The pick-and-carry (self-loading carry deck) capacity of the IC200-3H is 17,000 pounds (7,700 kilograms) with the load centered on its 66-square-foot (6.1-square-meter) cargo deck area. The crane is adept at maneuvering into tight spaces and then bringing its considerable power to bear.

    Boom

    The IC200-3H uses a four-section main boom, in contrast to its three-section sibling the IC200-2H. The boom has a horizontal reach of 50 feet (15.2 meters) and a vertical reach of 58 feet (17.7 meters). With an optional extension, it can achieve a maximum horizontal reach of 66 feet (20.1 meters).

    The crane’s boom rotation is continuous and 360 degrees. It can elevate its boom up to 73 degrees using a hydraulically powered, turret-mounted, planetary gear system. A rated capacity limiter comes standard.

    Most of the crane’s operations on site are powered by a direct-driven, tandem hydraulic pump delivering 29 gallons per minute (110 liters per minute).

    Chassis & Engine

    The IC200-3H has a gross vehicle weight of 31,080 pounds (14,100 kilograms). Its chassis is 14 feet, 11 inches (4.55 meters) long.

    In travel mode, the crane can reach a road speed of 18 mph (29 km/h), powered by a gasoline/LPG dual fuel engine. The standard 4.3-liter General Motors V-6 produces 93 horsepower (69 kilowatts). It is EPA Tier 2 emissions-compliant. Broderson has also offered Tier 4 Interim and Tier 4 Final engine options, such as a 100-horsepower (75-kilowatt) Cummins QSB3.3L turbo diesel.

    The front wheel-drive IC200-3H uses a Powershift transmission, with four speeds forward and reverse. Wet multi-disc brakes reliably arrest its motion. The operator can select rear-wheel steering, crab steering, or four-wheel round steering. Using the last mode, the crane’s turning radius is just 14.4 feet (4.4 meters).


    The compact Broderson IC200-3H has a 15-ton lift capacity and a maximum tip height of 73 feet with an optional extension. A 2013 edition is shown above.
    Options

    Options for the IC200-3H include four-wheel drive, an all-weather cab, pneumatic tires, foam-filled tires, air conditioning, heat, defrost, an offsettable boom extension (0, 15, and 30 degrees), additional lights, a winch, better seats, a noise reduction package, and more.

    Source: Broderson

    Questions? Comments? Visit the RentalYard Forums to ask questions, get answers, and share your thoughts.

      Blog Archive
    Economic Uncertainty Extending Sales Cycles in Used Heavy Equipment Market
    Posted 9/4/2026
    New Sandhills Global market reports show continued inventory decreases for used heavy-duty construction equipment on MachineryTrader.com and other Sandhills platforms. ...
    Read the full blog post
    Inventory Management Lets You Enter Data Once, Sync Everywhere
    Posted 8/27/2026
    Inventory Management is your single point of data entry for every machine, truck, aircraft, RV, trailer, heifer, bass boat—everything you’d like to sell on a Sandhills Global platform. ...
    Read the full blog post
    What's New At Sandhills Global
    Posted 8/26/2026
    Learn about the latest Sandhills features, including the new inventory Quick Add tool, a 120-day no-payment financing offer from Currency, and more. ...
    Read the full blog post
    Heavy-Duty Trucks Racking Up More Mileage While Used Truck Inventory Levels Continue to Fall
    Posted 8/10/2026
    Inventory levels of used day cab and sleeper trucks continued to decline in July, with overall used heavy-duty truck inventory 36% lower than last year. ...
    Read the full blog post
    What's New At Sandhills Global
    Posted 7/17/2026
    Find out about the latest Sandhills news, including AI to write your asset descriptions, the new UCC Search app, a new e-commerce solution, and more. ...
    Read the full blog post
    Sandhills Market Reports Show Continued Inventory Declines Across Used Equipment and Truck Markets
    Posted 7/6/2026
    New Sandhills Global market reports show ongoing inventory declines across several key used equipment and truck markets in June. ...
    Read the full blog post
    Submit Free Equipment Rental Quote Requests Easier Than Ever On RentalYard.com
    Posted 6/24/2026
    Finding the right construction equipment, farm machinery, trucks, trailers, or attachments to rent or lease just got simpler on RentalYard.com, thanks to the new dedicated Request A Quote page. ...
    Read the full blog post
    What's New At Sandhills Global
    Posted 6/4/2026
    Find out about the latest Sandhills features and news, including the new Bloomberg/Sandhills dealer survey, the new parts hub, Hot Lists, and more. ...
    Read the full blog post
    Used Construction Equipment Rentals Remain Strong as Sales Cool
    Posted 6/4/2026
    Used construction equipment inventory levels continued to decline in May, led by crawler excavators and wheel loaders, according to the latest Sandhills Global market reports. ...
    Read the full blog post
    Liebherr Debuts Generation 8 Material Handlers At IFAT 2026
    Posted 5/14/2026
    Liebherr recently debuted its Generation 8 material handler prototypes, the LH 18 M Industry and electric LH 22 M Industry E, with the new emCAB cabin and Mobility Kit battery options supporting magnets and recharging during use. ...
    Read the full blog post