2023 KOMATSU PC210 LC-11

2023

1,828

6610

Used

6610

It's all there! Hydraulic coupler, hydraulic thumb, auto-greaser unit Engine Model: Komatsu SAA6D107E-3 (water-cooled, 4-cycle, direct injection, turbocharged, aftercooled, with cooled EGR) Net Horsepower: 165 HP @ 2,000 rpm (ISO 9249/SAE J1349) Number of Cylinders: 6 Displacement: 408 cubic inches Hydraulics Type: HydrauMind (closed-center load-sensing system with pressure-compensated valves) Main Pumps: 2 variable displacement piston pumps Maximum Pump Flow: 125.5 gpm Relief Valve Settings: Implement Circuits: 5,400 psi Travel Circuits: 5,400 psi Swing Circuit: 4,190 psi Pilot Circuit: 470 psi Auxiliary hydraulics are supported (typically 1-2 additional proportional control circuits available as options for breakers, thumbs, etc.) Capacities Fuel Tank: 105.7 gallons Hydraulic System (total): 61.8 gallons Hydraulic Tank: 34.9 gallons Engine Oil: 6.1-6.2 gallons Cooling System (Radiator): Approximately 8.1 gallons DEF (AdBlue) Tank: 6.1 gallons Swing Drive: 1.7 gallons Final Drive (each side): Approximately 1.3 gallons Weight Operating Weight: 51,397 – 53,882 lbs (varies by shoe width, boom/arm config, bucket, full fluids, operator, and options like aux hydraulics/coupler; typical range with 31.5-inch shoes and standard setup is around 53,000-54,000 lbs) Ground Pressure: Approximately 5.9-6.7 psi (depending on shoe width, e.g., lower with wider shoes) Dimensions (approximate, standard config with one-piece boom and 9 ft 7 in arm; may vary slightly with attachments) Shipping/Transport Length: Approximately 32 ft (overall, boom down) Overall Width: 10 ft 5 in (with 31.5-inch shoes; narrower/wider with other shoe options) Height to Top of Cab: Approximately 10 ft Tail Swing Radius: 9 ft 11 in Ground Clearance: 1 ft 5 in Track Length on Ground: Approximately 12 ft Max Digging Depth: Approximately 21 ft 9 in (standard arm) Max Reach (along ground): Approximately 32 ft

Yes

Hydraulic